A short 2-band ladder line antenna for portable ops

Introducing the 2B2L antenna

Wouldn’t it be nice to have a short, fairly efficient, rapidly deployable, low visual impact, vertical antenna that can be operated on both the 20 meter and 40 meter bands? The 2B2L (2 Band Linear Loaded) antenna comes very close to a perfect match for those specifications.

The 2B2L is the brainchild of Tim KQ4TQ who pitched the idea to me in an email recently. Seeing the potential in Tim’s idea, I hastily built a prototype and erected it in my backyard for testing. The 2B2L is based on the “Simple Ladder Line Antenna for Portable Ops” discussed a couple of weeks ago here on Ham Radio Outside the Box. But here is the genius in the 2 band version: by adding a loading coil and a tail section – also made from ladder line – to the top of the original single band (20m) version, we can add the 40m band. The whole antenna towers up to the dizzying height of just 15 feet!

But, just a moment; before the grey-haired, white-coated men with a physics diploma hanging on the wall pick up their quill pens to denounce the 2B2L, a confession is in order. Yes, admittedly, the 2B2L is not perfect; field portable antennas rarely are perfect. Those of us who like to operate out in the Big Blue Sky Shack must necessarily accept some compromises. Those of us who like to operate QRP accept even more compromises. So where’s the gotcha?

The loading coil for the 40m extension is the weak link. It serves two purposes: (1) it acts as an RF choke for the lower 20m band section; it’s high impedance effectively terminates the lower section of the antenna so that the top section does not affect operation on 20 meters; (2) it acts as a loading coil for the 40 meter top section which is considerably shortened as a result. But is it actually all bad? Yes, it has some loss due to the i^2R effect, but consider this: the whole antenna is radiating on 40 meters and the coil is near the top where the current is lower. If I am thinking with half a brain here please correct me in the comments. I did once think I was wrong, but I was mistaken!

Can an antenna that is only 15 feet tall really be efficient on 20m and 40m? The secret to how it can claim enough efficiency to actually make contacts out in the field lies in its use of linear loaded elements. Two sections of ladder line, each shorted at the top, provide the linear loading which shortens the required length by about 30%. Linear loading is considered one of the most efficient ways of shortening an antenna.

Also, the 2B2L is mounted quite close to the ground which inevitably diverts some RF to warming the earthworms. Mine is fed about 12 inches (~30 cm) above ground. It could also be raised higher and used with tuned, raised radials, but on 40 meters the radials would each be around 33 feet long. I chose to use short ground radials instead.

Where to buy a 2B2L?

Sorry folks, this is another real hobbyist’s project – you gotta build it yourself. You’re going to need some ladder line from whatever source you go to for ham radio supplies. Mine was a generous gift from my friend and CW buddy Mary VE3MVM. You will also need a coil. I had an air core coil lying in the drawer from a previous project. I built it using a a short section of PVC tubing about 2 inches (5 cm) in diameter. You will need an inductance meter, or a NanoVNA, to measure the inductance. As a purely rough guide, my coil has 35 turns of 20 awg stranded insulated wire. Here is the materials list:

• 11.5 feet (3.5 meters) of ladder line for the 20 meter radiating element
• 38 inches (0.97 meters) of ladder line for the 40 meter extension
• 35 microhenry coil

Setting up the 2B2L antenna

The 2B2L can be erected on a pole about 16 feet (or about 5 meters) tall. It is fed at the bottom via coax to a transceiver. The 2B2L requires radials. I tried a set of 8 radials, each 7 feet (2 meters) long. That worked but 4 radials, each 13 feet long provided a better return path on 40 meters.

In keeping with recent practise here on Ham Radio Outside the Box, the radials are tuned with a GTU (Ground Tuning Unit). The GTU has to be separately adjusted for each of the two bands. This ensures that the antenna system is working as efficiently as possible – without a tuner! An antenna analyzer connected via a short coax showed an SWR well below 1.5 could be obtained on both bands.

Does it QSO?

No, it just sits there grinning at the sky, but I have QSO’d using the 2B2L. My best contact so far has been a 2000 kilometer QSO with a station in Colorado on 20 meters by QRP CW. 40 meters is most active in the early morning and in the evening when I am inactive, but I am going to have to make the effort to go 40 meter QSO hunting real soon. Stay tuned.

Help support HamRadioOutsidetheBox

No “tip-jar”, “buy me a coffee”, Patreon, or Amazon links here. I enjoy my hobby and I enjoy writing about it. If you would like to support this blog please follow/subscribe using the link at the bottom of my home page, or like, comment (links at the bottom of each post), repost or share links to my posts on social media. If you would like to email me directly you will find my email address on my QRZ.com page. Thank you!

The following copyright notice applies to all content on this blog.

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.