Is it Standing Wave Ratio (SWR)? It is common knowledge that when an antenna has high SWR some of our transmitted power is wasted instead of being transmitted. But is this really true? The trouble with "common knowledge" is that it spreads without further scrutiny. "It must be true because that's what everybody thinks". But … Continue reading What really determines the efficiency of an antenna?
Tag: amateur-radio
4:1 Balun or 4:1 Unun – how to choose?
Perhaps one of the greatest confusions in the hobby of ham radio is wrapped around the subject of baluns and ununs. What are they, where should they be used and what do they do? At Ham Radio Outside the Box several antennas that need a 4:1 impedance matching device have been described. Since I had … Continue reading 4:1 Balun or 4:1 Unun – how to choose?
An Outside the Box version of the Delta Loop antenna
I have written about delta loop antennas before - notably in April 2023 in a post entitled "Delta Loopy Ideas". A few weeks ago I received an email from Alan WA3EKL who suggested I should take another look at delta loops and offered a lot of helpful advice, tips and suggestions for making this type … Continue reading An Outside the Box version of the Delta Loop antenna
Field Day with the POTA Performer
A cold, windy day on the beach at Ainslee Wood Conservation Area on Georgian Bay (part of the Great Lakes) on the first day of the ARRL Field Day 2025. Confession: I am not really a contester, I have far too short an attention span to spend hours sitting in a chair pounding brass. This … Continue reading Field Day with the POTA Performer
Reviving a Webster Band Spanner – a 1950s manual screwdriver antenna
About 20 years ago I was approached by a neighbor who, knowing that I am a ham, asked if I might be interested in looking at some of the old ham junque he had accumulated over many years. He was a fine gentleman, in his golden years, who was no longer active in the hobby. … Continue reading Reviving a Webster Band Spanner – a 1950s manual screwdriver antenna
An End-Fed Half Wave Antenna – with no impedance transformer?
One of the great benefits of being a ham radio blogger is that it opens up a new door to learning. Through that door comes valuable input from readers of Ham Radio Outside the Box. Let me state one thing very clearly: I am not an expert; the intent of this blog is to report … Continue reading An End-Fed Half Wave Antenna – with no impedance transformer?
How to Really Make the QMX Ready for the Big Blue Sky Shack
The QRP Labs QMX is a wonder of modern technology. By employing an SDR hardware platform a whole plethora of features can be made available by simply installing new firmware. I absolutely love my QMX. It has become my most used radio for field operations. I grumbled into my beer glass about the long wait … Continue reading How to Really Make the QMX Ready for the Big Blue Sky Shack
Major QMX Operator Flaw Exposed
QMX non culpa, mea culpa! I thought I was smart. I have a physics degree; college taught us 1970s long-haired layabouts 3 ways to build an atomic bomb. But half a century later I make simple errors with my ham radio equipment. The fault is mine and not QRP Labs brilliant little QMX transceiver. In … Continue reading Major QMX Operator Flaw Exposed
Has QRP Ruined Ham Radio?
No wait! Before you and the boys load up your guns, jump in the truck and come-a-huntin' for me, that's not what I really meant. I love QRP. Well most of the time. Admittedly I had one of those "but it was fun anyway" days yesterday - i.e. I got skunked; no contacts, not a … Continue reading Has QRP Ruined Ham Radio?
Ham Radio Outside the Box 