Category: Outdoor Ops

A Linear-Loaded Monopole antenna for hiking

There is a lot of information online about Linear-Loaded Dipoles, but I haven't found anything at all about cutting a Linear-Loaded Dipole in half to create a Linear-Loaded Monopole worked against ground. The legendary L.B. Cebik (W4RNL, SK) published a design philosophy for an 80m Linear-Loaded Monopole, but it didn't match what I had in … Continue reading A Linear-Loaded Monopole antenna for hiking →

The “tootie-toosie” and the Hiking Antenna

My favorite way of operating is to hike into the woods, find a clearing, set up a quick and easy antenna, make one or more contacts and move on. Well, to be honest, I might pause long enough at a back country waypoint to get out my Aeropress and brew up a refreshing cup of … Continue reading The “tootie-toosie” and the Hiking Antenna →

Isn’t every quarter-wave antenna really a half-wave antenna?

It's a bit early for April Fool's jokes so this is a perfectly serious discussion. Just maybe, the distinction between a quarter-wave and a half-wave antenna is a bit more obscure than we thought. Which is better; a quarter-wave or a half-wave antenna? Does it even matter if indeed every quarter-wave antenna really is a … Continue reading Isn’t every quarter-wave antenna really a half-wave antenna? →

The CFHW – a simple, efficient HF antenna I may never use

What in Heaven's name is a "CFHW"? A CFHW is a Center-Fed Half-Wave antenna. You may know it better as a dipole and it is indeed a highly efficient simple wire antenna. I can't claim originality for the term "CFHW"; it started as a joke on one of the forums I follow. Following the trend … Continue reading The CFHW – a simple, efficient HF antenna I may never use →

A highly efficient multiband QRP L-match builder project

Here is a project that provides a much more efficient way of matching an End-Fed Half Wave antenna than the usual 49:1 impedance transformer. High ratio transformers are prone to inductance leakage, core saturation and overheating leading to low efficiency. Although a 49:1 (or similar high ratio) transformer can present a low SWR to a … Continue reading A highly efficient multiband QRP L-match builder project →

Escaping from the shack between snowstorms

HamClock - or Open Ham Clock? It was recently announced that the popular HamClock program will cease to function in June 2026 due to the death of its creator. HamClock has been running on an Inovato mini computer in my shack for a long time now. It has given instant access to a wealth of … Continue reading Escaping from the shack between snowstorms →

Engineering challenges of the completed QRP EFHW coupler

Kudos to Kits and Parts, the United States Postal Service and the Canada Post dog sled teams who fearlessly fought their way through blizzards on the frozen barren tundra into the wild white yonder to safely deliver my package of toroid cores. But, as soon as I had unpacked the goodies I realized I may … Continue reading Engineering challenges of the completed QRP EFHW coupler →

A 20-minute QRP End-Fed Half-Wave antenna coupler

It was almost time to make lunch but I had an idea that just wouldn't wait. I figured I had 20 minutes to zip down to the basement shack/development lab and throw a simple circuit together on the workbench. I had been re-reading (for the 1000th time) AA5TB's website about using a parallel tuned circuit … Continue reading A 20-minute QRP End-Fed Half-Wave antenna coupler →

The ultimate rebuild of an ancient Yaesu FT-817.

I think it was a couple of years ago now I ordered a QRP Labs QMX transceiver. It quickly, but temporarily, became my favorite radio for portable field operations. I have written before about why I believe the QMX is a mighty fine piece of miniaturized technology but is less suitable for the rigors of … Continue reading The ultimate rebuild of an ancient Yaesu FT-817. →